
DIY Modules
For builders & designers
Fully assembled modules for custom cabinetry, dressing rooms and safes.
Made for your installation
Configure your modules
Choose your array, winding system and power. Modules arrive fully assembled; power supplies are sold separately.
Choose your winding system
Match your power supply
For builders & designers
Your design.
Orbita inside.
Fully assembled watch-winder modules for custom cabinetry, dressing rooms and safes.
Plan your installation
- For the project team
- Builders & designers
- Two winding systems
- Rotorwind® & Programmable
- Before fabrication
- Confirm the installation details
From the first drawing
Plan watch care into the project.
For cabinetmakers, builders and interior designers, the module is one part of a considered installation. Resolve the layout, winding system and service access together.
Layout
Establish the collection size and winding positions. Coordinate the openings and panel details against the selected module’s installation manual.
System
Choose Rotorwind® or Programmable around the watches’ winding requirements and the client’s needs.
Power & access
Plan the power location, connections and rear access. Power supplies are sold separately; confirm the appropriate supply for the installation.
Choose the movement
Choose the winding system.
Match the module to the watch collection and the project’s requirements. Explore both systems before specifying.


Installation resources
Put the right details on the drawing.
Use the installation manual for the winding system you select. Confirm the current module, power and access requirements with Orbita before fabrication.
Rotorwind®
Rotorwind® installation & setup
A visual guide to the module, mounting, power and timing settings.
Open installation guide (PDF)Original manufacturer manual (PDF)Programmable
Programmable installation & setup
A visual guide to the module, mounting, power and winding controls.
Open installation guide (PDF)Original manufacturer manual (PDF)Considered spaces
Built into considered spaces.
Existing Orbita installations by LA Closet Design show how watch care can be integrated into a dressing room or custom cabinet.

Designed into the cabinetry.
Coordinate the winding positions with the cabinet elevation, finish and the client’s daily routine.

A collection within reach.
Plan access to the watches, module controls and rear connections as part of the millwork design.
Installation photography: LA Closet Design, from Orbita’s existing gallery.
Your project brief
Start with the installation.
Tell us about your cabinetry, dressing room or safe project. Include your watch count, available space and timeline, if known.
The Orbita team can help you consider the module selection alongside your cabinetry plan.
Questions from the project team.
What should we confirm before fabrication?
Confirm the selected module, layout, openings, finished panel, power requirements and rear access using the applicable installation manual and guidance from Orbita.
Do the modules arrive assembled?
Yes. Orbita DIY modules arrive fully assembled. The project team integrates them into the cabinetry, dressing room or safe according to the module’s installation instructions.
How do we select the winding system and power?
Start with the watches’ winding requirements, then review the Rotorwind® and Programmable options. Power supplies are sold separately. Discuss the system and power selection with Orbita for the proposed installation.
For the project team
Keep Orbita in the plan.
Bring the cabinetry layout and watch-care requirements into the same conversation.